Global - English
Sign out
TL-R1200PES-RP
PCIe Interface 12-bay JBOD, supporting SATA drives, for petabyte-scale expansion designed specifically for QNAP NAS
The TL-R1200PES-RP TL PCIe interface JBOD storage enclosure allows you to expand the storage capacity of a QuTS hero or QTS NAS by using SATA hard drives. Providing large data capacity and fast transfer speed, the TL-R1200PES-RP is the ideal solution for archiving/backing up virtualization applications, surveillance recordings, large data, and multimedia.
Actual number of expansion units may depend on the host NAS. Click here to learn more.
Note:
• The host QNAP NAS requires QuTS hero h5.1.2 / QTS 5.1.2 (or later) and updating to specific BIOS versions per each model.
• Supported maximum pool sizes: 2.0 PB for QuTS hero NAS; 308 TB for QTS NAS.
2.0 PB capacity
Expand up to 2.0 PB capacity for QuTS hero NAS, by connecting twelve expansion enclosures (up to 144 hard drives in total).
Economy
The TL-R1200PES-RP supports SATA hard drives, which are common, budget-friendly, and available with large capacities.
Up to 64 Gb/s
The TL-R1200PES-RP features PCIe Gen 3 x8, providing up to 64 Gb/s data transfer speed.
Note: Actual transfer speeds depend on the host NAS's PCIe slot and the storage units used.
Easy setup
Just connect your TL-R1200PES-RP to the host NAS to expand NAS capacity. RAID re-building on the host NAS is not required, and setup is finished within a few minutes.
Host-based power management
The TL-R1200PES-RP power on/off is linked with the host NAS.
Redundant power supply
Ensures service continuity with stable and reliable power supplies.
QNAP enterprise NAS with petabyte-class storage
Use QNAP enterprise and all-flash QuTS hero NAS paired with multiple TL-R1200PES-RP JBODs, to obtain both breakthrough performance and massive capacity. The TL-R1200PES-RP supports SATA hard drives, providing greater choice in selecting high-capacity drives. This configuration is ideal for enterprises, science research institutions, and media production companies that require high-capacity storage for backing up or storing virtual machines, containers, and what is produced/generated by their high-performance NAS.
Find your petabyte-class solution
Cascades multiple expansion units
Install the QXP-3X8PES (PCIe Gen 3 x8) or the QXP-3X4PES (PCIe Gen 3 x4) storage expansion cards in your QNAP NAS depending on your requirements for flexible storage expansion.
Actual number of expansion units may depend on the host NAS. Click here to learn more.
Note:
1. The TL-Rx00PES-RP PCIe expansion series requires users to connect cables to specific inputs/outputs.
2. Not all NAS models support cascade connections.
Expand existing NAS storage pools
You can expand existing storage pools on the host NAS by simply adding a new RAID created on the TL-R1200PES-RP. RAID re-building or complicated settings are not required. All settings can be configured using Storage & Snapshots Manager on the host NAS. The TL-R1200PES-RP is a great solution for accommodating ever-increasing data or backup files.
Note: To achieve better performance, it is recommended to create storage volumes physically located within the same NAS or expansion enclosure, rather than creating storage volumes across the NAS or expansion enclosure.
Power on/off linked with host QNAP NAS
The TL-R1200PES-RP power status is linked with the host NAS, which helps to reduce hardware management tasks for IT staff.
Supported PCIe storage expansion cards
 QXP-3X8PES |
 QXP-3X4PES |
|
|---|---|---|
| Expansion ports | 2 | 2 |
| Interface | PCIe Gen 3 x8 | PCIe Gen 3 x4 |
| Supported cables | CAB-PCIE10M-8644-8X special cables | CAB-PCIE10M-8644-4X special cables |
Note:
• The TL-R1200PES-RP package contains a 1M CAB-PCIE10M-8644-8X special cable that only support the QXP-3X8PES. The QXP-3XxPES series are sold separately.
• The QXP-3XxPES series does not come with any cables.
• Always consult the compatibility list before purchasing accessories and expansion cards.
People Also Viewed
-
QXP-3X4PES
Use a PCIe Gen 3 x4 card to connect your NAS to TL PCIe Interface JBOD for storage expansion
QXP-3X4PES
Use a PCIe Gen 3 x4 card to connect your NAS to TL PCIe Interface JBOD for storage expansion
Optional Accessories
-
PWR-PSU-300W-DT02
Single 300W power supply unit for redundant PSU, Active PFC, 90~264VAC, , Vout:12VDC/12VSB, CCL, RoHS
Dimension (L × W × H): 18.50 × 7.35 × 4.00 (cm)
Weight: 0.91 (kg)
For safety information and operating instructions, please refer to the documentation of your original QNAP product.
-
SCR-HDD25A-96
Screw pack for 2.5" HDD / SSD intallation, 96 pieces, Flat head machine screw
Dimension (L × W × H): 0.10 × 11.80 × 12.80 (cm)
Weight: 0.01 (kg)
-
SCR-HDD35B-96
Screw pack for 3.5" HDD intallation, 96 pieces, Flat head machine screw
Dimension (L × W × H): 0.10 × 11.80 × 12.80 (cm)
Weight: 0.03 (kg)
-
SP-TS-TRAY-BLACK
Black HDD tray with black flat head machine screw x6 for 2.5" HDD & silver flat head machine screw x8 for 3.5" HDD
Dimension (L × W × H): 18.50 × 14.00 × 4.00 (cm)
Weight: 0.20 (kg)
-
RAIL-B02
new rail kit for new 1U & 2U NAS: TVS-471U, 1253U, etc
Dimension (L × W × H): 73.80 × 10.00 × 7.00 (cm)
Weight: 2.48 (kg)
This rail kit is designed for racks with 25-inch mounting depth. You may need to reserve some space when installing and adjusting the rail kit for racks with 18-inch mounting depth. For installation details, click https://qnap.to/rail-b02.
-
RAIL-S01
Rail Kit, support rack-post 4.96" ~ 16.34" (126 ~ 415mm) depth cabinet, for 1U/2U/3U short-depth rackmount QNAP model
Dimension (L × W × H): 54.00 × 11.00 × 7.00 (cm)
Weight: 1.62 (kg)
-
CAB-PCIE10M-8644-4X
QNAP PCIe JBOD special cable for TL-Rx00PES-RP and QXP-3X8(4)PES only (SFF-8644 4X to SFF-8644 4X), 1.0 m
Dimension (L × W × H): 110.00 × 2.17 × 2.00 (cm)
Weight: 0.17 (kg)
-
CAB-PCIE10M-8644-8X
QNAP PCIe JBOD special cable for TL-Rx00PES-RP and QXP-3X8PES only (SFF-8644 8X to SFF-8644 8X), 1.0 m
Dimension (L × W × H): 110.00 × 1.15 × 2.00 (cm)
Weight: 0.26 (kg)
