The Hikvision DS-2CD2045FWD-I is a special light-sensitive 4MP bullet camera for outdoor use. The camera has a viewing angle of 109 °, IR night vision up to 30 meters and a weatherproof housing (IP67). It is striking that he needs only a small amount of light (0.008 lux) to produce color images.
Characteristics Hikvision DS-2CD2045FWD-I 2.8
Resolution: 4MP, 2688 × 1520p
High light sensitivity: 0.008 lux
Viewing angle fixed: 109 °
IR night vision up to 30 meters
3D noise reduction and 120dB WDR
H.265 + image compression
MicroSDHC card slot (up to 128GB)
Three video streams
Powered via 12V or PoE (802.3af)
Bullet camera for outside
The Hikvision DS-2CD2045FWD-I 2.8 is a reliable outdoor security camera with 4MP sensor (2688 × 1520p) and infrared night vision. What is striking about this camera is that very little light is needed (at least 0.008 lux) to produce color images. Over and underexposed images are automatically corrected thanks to the large dynamic range of 120 dB (True Wide Dynamic Range). You always have clear images, day and night.
Via the Hikvision camera software or the Hikvision app you can easily watch the Hikvision DS-2CD2045FWD-I 2.8. The security camera supports three streams that you can set to a different image quality. For example, you set the stream to appear on a mobile device at a lower quality than the stream you watch on your computer. This way you can save considerably on bandwidth.
Thanks to the dust and water resistant housing (IP67), the Hikvision DS-2CD2045FWD-I 2.8 is perfect for outdoor use. Is someone trying to sabotage the camera? The camera manager receives a notification when the lens is covered or sprayed.
Image storage and H.265 + compression
The video recordings of the Hikvision DS-2CD2045FWD-I 2.8 can be stored directly on an SD / SDHC / SDXC card (up to 128 GB), NAS or NVR. To reduce the file size, the Hikvision DS-2CD2045FWD-I uses 2.8 H.265 + image compression. This technique is no less than twice as efficient as H.264 and has no further influence on image quality.
Power supply: 12V or Power over Ethernet
You can power the Hikvision DS-2CD2045FWD-I 2.8 in two ways: via a 12V power adapter (not included) or via Power over Ethernet (PoE). With PoE, the power is delivered directly via the network cable so that you do not need an extra socket. You will still need a PoE injector for this.