Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes. Dataline surge protection Provides protection of connected equipment from power surges on the data lines. Surge only outlets Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Energy Management Function Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on. Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Customizable voltage-transfer points Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
Customizable voltage sensitivity Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Cold-start capable Provides temporary battery power when the utility power is out.
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.
Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse.
Simple battery replacement Increases UPS availability by allowing quick, easy battery replacement.
USB connection Use your PC to access additional power protection and management features for your UPS via a USB Port.
LCD Status Display Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Audible alarms Provides notification of changing utility power and UPS power conditions
Disconnected battery notification Warns when a battery is not available to provide backup power.
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.