Import en distributie van datastorage-, surveillance en multimedia systemen

Ubiquiti UniFi nanoHD

In stock

The Ubiquiti UAP NanoHD is the smallest model in the UniFi series, but delivers great performance. This powerful access point provides a fast and reliable WiFi network with capacity for a large number of users. It uses the latest 802.11ac Wave 2 MU-MIMO technology.

Lightning fast indoor access point
The Ubiquiti UniFi UAP NanoHD is the compact version of the UAP AC HD. Although small in stature, with this access point you can set up a stable and reliable WiFi network with high capacity. The device is suitable for indoor use and provides a transfer speed of up to 300 + 1733 Mbps. The powerful 4x4 MU-MIMO transmitters with beamforming ensure excellent coverage.

Wave 2 MU-MIMO
The UniFi UAP NanoHD supports Wave 2 MU-MIMO technology. The advantage of this technique is that the access point can communicate with multiple clients at the same time, which was not yet possible with older access points. With Wave 2 MU-MIMO, clients benefit from significantly higher speeds and better WiFi performance.

Ceiling or wall mounting
Thanks to the slim smoke detector design, you can unobtrusively attach the Ubiquiti UniFi UAP NanoHD to the ceiling or wall. There are even optional skins available (including marble, wood or camouflage prints) that allow you to completely blend in with the access point in the environment. You connect the Ubiquiti UniFi to your router, after which you install and manage the access point via the free UniFi Controller software from Ubiquiti. The software is available for both Windows and Mac.

Power over Ethernet
The Ubiquiti UAP NanoHD supports 802.3af Power over Ethernet, or PoE. With the help of a PoE injector, the access point can receive power via the network cable. Do you use multiple access points? In that case we recommend using a (UniFi) switch that supports 802.3af.

Free management software
The UniFi Controller software is part of the Ubiquiti UAP NanoHD. This allows you to not only manage the access point, but also monitor network performance, identify problems, make analyzes and create a login portal for guests. If you use multiple access points, these can be managed centrally via the UniFi Controller. The software is very user-friendly and also suitable for people with little technical knowledge.

- Dual-band 802.11ac WiFi
- 4x4 Wave 2 MU-MIMO
- Speeds of 300 Mbps (2.4 GHz), 1733 Mbps (5 GHz)
- Smallest model from the UniFi series
- Suitable for indoor use

Maximum data transfer rate: 1733 Mbit/s
2.4 GHz: Yes
5 GHz: Yes
Networking standards: IEEE 802.11a,IEEE 802.11ac,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.1Q
Ethernet LAN data rates: 10,100,1000 Mbit/s
Number of users: 200 user(s)
MIMO type Multi User: MIMO
Throughput: 300 Mbps/1733 Mbps
Quality of Service (QoS) support: Yes
VLAN support: Yes
Wireless isolation: Yes
Wi-Fi Multimedia (WMM)/(WME): Yes
Reset button: Yes
Certification: CE, FCC, IC300

Ports & interfaces
Ethernet LAN (RJ-45) ports: 1
DC-in jack: Yes

Security algorithms: AES,TKIP,WEP,WPA,WPA-Enterprise,WPA-PSK,WPA2
SSID Broadcast on/off: Yes
Number of SSID support: 8

Antenna gain level (max): 3 dBi
Integrated antenna: Yes

Power consumption (typical): 10.5 W
Input voltage: 44 - 57 V
Power over Ethernet (PoE): Yes

Product colour: White
Placement: Ceiling,Wall

Operational conditions
Operating relative humidity: (H-H) 5 - 95%
Operating temperature: (T-T) -10 - 70C

Weight & dimensions
Width: 160 mm
Depth: 160 mm
Height: 32.6 mm
Weight: 300 g


Brand: Ubiquiti
Model: UAP-nanoHD
Weight: 300g
EAN code: 817882024204
Productcode: UAP-nanoHD
Warranty: 2 jaar

For more information, please visit this products webpage.